Category Archives for Burner Maintenance

Burner Cleaning and Repair

Once the burner has been disassembled and inspected, it should be cleaned and repaired in order to return it to the manufacturer’s specifications. As we mentioned earlier, the smallest port in a burner will plug first, therefore, you need to … Continue reading

25. April 2018 by sam
Categories: Burner Maintenance | Leave a comment

Inspecting the Burner

Once the burner has been removed, check it against the manufacturing and installation tolerances shown on the burner manufacturers drawing. In addition, review the burner tip alignment and height. Note and adjust any discrepancies prior to reinstallation. This is much … Continue reading

25. April 2018 by sam
Categories: Burner Maintenance | Leave a comment

Removing the Burner

Whenever you receive a work order to repair a burner, the first step is to inspect the flame patterns. Always check draft to make sure that the furnace is operating at negative pressure before opening the peepholes to avoid getting … Continue reading

25. April 2018 by sam
Categories: Burner Maintenance | Leave a comment